Table of Content
This is the standard height for professional bars, but it is not always necessary. You may want a slightly shorter bar in some cases, which would be around 36 to 38 inches. Much lower than that and you can’t really call it a bar anymore. Choose a bar cart to make any space into a makeshift bar.
We advise you to start your planning process by going to your preferred bars and/or eateries and making careful notes of what you appreciate in a bar. A home bar is about more than just cocktails and convenience, it’s a chance to show off your own speakeasy sensibilities. And as every lounge owner knows, when it comes to curating the perfect bar, the devilishly good drink is in the details. Go ahead and explore the best bar top ideas and coolest counter top designs below.
DESIGN PARTNERS
The next step in creating this bar is to add stabilizers to the top plate to ensure stability in the bar. By adding several 2X4s to the top of the bar you will create a spot to fasten the MDF board to. Cut enough pieces that you can have one stabilizer over each stud on the main framework. You will want to cut this piece as long as you want the bar top to be.
If you do this, be sure that it has a stainless steel interior and a drainage valve. Otherwise, it will be much harder to remove the water once the ice has melted. We’ve already covered the height of a bar counter, but you also have to consider its length and width.
Where Is Pacifico Beer Brewed?
Whether you’re looking to build a bar for your home or for your business, there are a few things you’ll need to keep in mind. In this article, we’ll walk you through the process of building a bar, from start to finish. Horizontal surfaces bear the brunt of the weather so it’s essential to choose surfaces that can handle downpours, direct sunlight and frost. Low maintenance is also a key factor, especially as acidic drinks can stain surfaces. Natural stone, quartz and concrete are all popular options, while large-format porcelain tiles are great for modern backyards. Include a slight gradient to prevent rain pooling on the surface.
Complete the posh look with crystal pendant lights and chrome bar stools. The living room can be partitioned into a bar counter when there’s a large space available. In a 3-walled space design, each wall can be used to display a certain accessory creatively, with one wall giving rise to a counter for serving and mixing.
Step 6: Epoxy Application
Make sure you don’t cram them too tightly or they will be hard to get out. Set them somewhere in plain sight on the bar so any time you have guests they’ll be easy to find.Jiggers, shakers, and other larger items won’t fit in the container. No matter what type of bar you set up, trays are a great way to keep the area organized. Use basic wooden serving trays or shiny metal ones, depending on the look you want.
Step one is to choose where you want to set up your in-house bar. If your kitchen is undergoing renovations, factor in the ideal bar nook in the form of an L-shaped counter or a narrow kitchen island. We recommend placing the bar along the outer edge of the kitchen, bordering the dining area, as this makes it appear spacious and inviting. Creating a wet bar in your home can be a great way to entertain guests or simply enjoy a night in. If you’re interested in adding a custom wet bar to your home, make sure it has all of the essentials.
Wood-framed stone
There’s no denying that bar carts are one of the hottest furnishings around—it’s hard to spot a chic space without one. If your bar cart is open, be mindful of organizing it neatly. You may even want to store your less frequently used items in a pantry, so it doesn’t look too cluttered or messy. With the 1-1/2 inch trim cut a piece the same length as the MDF board that you just installed. Use finish nails to fasten the trim to the MDF board flush with the top of it.
I do this with every project to ensure the colors and layout will work. I can verify that this was the right choice after a few months of use. The initial step after getting the cabinets installed was to get the measurements for the bar top.
My bar frame measure 84.5 inches across the front of the bar and is about 40 inches tall. If you don’t any woodworking or tool experience then this a good place to start to build a dry bar. As a trim carpenter, Dean has lots of friends in the building trades and got lots of help with his barroom. Every DIY bar builder we talked with told us that planning is tough. With so many dimensions and space considerations, using pencil and paper just doesn’t provide a clear preview of the final results.
If you are thinking about building a bar, here are 22 great ideas to get you started. Whether you have room for a single tray or a full built-in wet bar, check out these home bar ideas that prove becoming your own bartender isn't as daunting as it may seem. Choosing bar countertop ideas carefully is a vital part of the home bar design process. In this kitchen, the bar countertop is defined by an exposed wooden edge, creating an eye-catching design.
If you are a tidy person, why not show off your favorite glassware and bottles? For a stylized look, stack collections of your most-loved glassware, crockery, line up fresh herbs and incorporate small pieces of art along your bar countertop. If you are looking for luxury home bar countertop ideas you will be pleased to know that they can be built in just about any home. Instead, hang a couple of shelves on the wall for drink and glass storage. Add a rack that hangs glassware upside down to existing cabinetry for more storage.Hang shelving at about chest level so it is easy to access. A two foot long shelf that’s six inches deep will hold more than you might think.
This stain has the color and polyurethane built in, so I did not need to add a top protective coat to the stain. The wood putty and sanding really helped to join the pieces together, for a smooth finish. I cut the wood multiple times and adjusted the angle, but I couldn’t get it to fit just right. This should be explained further in the instructions of the bar rail if needed, which is probably easier than I can explain it here. The bar rail is a separate process in itself because you cut the top of the bar. This bar cart can be rotated 360 degrees, so you can easily pull this bar on wheels near any tv in your home.
Here are bar top ideas to inspire you to put your own personal touch on your home bar. I needed two pieces because one couldn’t fit the length of the bar. If you prefer a different look on the front of your bar, here are home bar ideas that you probably haven’t seen before. There is nothing attaching the basement bar to the wall at this point, so be careful not to tip the bar while working on it. I had ZERO woodworking experience at the time, but I decided to learn how to build a bar because I couldn’t afford to pay someone to build it. See how your plan looks—and work out potential problems—before you start cutting wood.
Therefore, remodeling your home to add a wet bar is a great investment. It turns a living room into an entertaining space where having the drinks close to the party allows the homeowner to play host, pour the liquor, and join in the fun. This well-designed home bar is well-appointed because it already includes ample wine racks, a couple of coolers, storage shelves, drawers and service countertop.
No comments:
Post a Comment